Engineering College

## Answers

**Answer 1**

In order to get close to the **equation**'s roots, the bisection** **approach divides the interval several times.

**The bisection method **is a technique for finding the roots of polynomial equations. It separates and splits the region that contains the equation's root. This strategy is based on the continuous function’s **intermediate **theorem. It works by reducing the gap between the positive and negative periods as it approaches the desired response. This method narrows the gap between the variables by averaging the positive and negative intervals. Even though it is a simple process, it proceeds slowly. The bisection method is also known as the dichotomy method, binary search method, and root-finding method. The point x that is a component of (a, b) and has the value f(x) = 0 exists, then, in accordance with the intermediate theorem.

Learn more about **The bisection method** here:

https://brainly.com/question/29558045

#SPJ4

## Related Questions

which is an increased risk of performing vertical ventilation?

### Answers

There's a chance that the building or its roof will collapse, as well as that you'll become disoriented from the dense smoke or **accidentally** step off the roof.

What presents the biggest danger to firemen practising vertical ventilation?

Which benefit from correctly executed ventilation is most likely to occur? the structure's inside has improved. What poses the biggest risk to firefighters practising vertical **ventilation**? failure of a roof

What kind of ventilation would be vertical, then?

By allowing smoke and poisonous gases to follow their natural course upward, **vertical ventilation** removes these substances from the air. Fire departments accomplish this by using a ladder, saws, and other tools to climb the roof, create an aperture on the roof's **exterior**, and then knock out the ceiling with a different tool.

To know more about** vertical ventilation** visit:

https://brainly.com/question/11471552

#SPJ4

1.7 find the time constant form the following differential equation, give that z in the input, y is the output, and a through h are constantsa dt/dy + bx + c + hy = e dy/dt + fx + g

### Answers

The **needed **values of dy/dt and dx/dt are [(-28)/3] and 4, **respectively**, for the given equation: x2 + y2 = 400.

Dy/dt is equal to -52/x2. What is** implicit discrimination**, exactly? Symbolizing the derivative of a dependent variable, solving the resulting expression for the symbol, and **differentiating **each term **separately **to find the **derivative **of a **dependent **variable in an implicit function. The following **equation **is used to calculate the value of dy/dx: xy = 4, y = 4, x/x, y = 4x1, and dy/dx is either -4x2 or -4/x2. value of dy/dt. "dx/dt" = "dy/dt" = "dy/dx,", Dy/dt = x2(4/13) = x2(52/x2). **Consequently**, dy/dt equals -52/x2. dx/dt = 13. F(x) is said to be **differentiable **at the point x = an if the derivative f '(a) exists at each point in its domain. **Assuming **two functions g and h, where y = g(u) and u = h, respectively (x).

Learn more about **Implicit discrimination** here:

https://brainly.com/question/28334807

#SPJ4

Which of the following statements is true?a. .NET Core supports Web Forms development.b. .NET Framework only runs on Windows.c. .NET Core only runs on Windows.d. .NET Framework supports ASP.NET Core MVC development.ASP.NET

### Answers

c.**NET Framework** only runs on Windows. A software development framework for creating and operating Windows programs is called.NET Framework.

The.NET platform, a group of technologies for creating programs for Linux, macOS, **Windows**, iOS, Android, and other platforms, includes the.**NET Framework**. The first version of.NET was implemented using the.**NET Framework.**

On **Windows**, it supports running webpages, services, desktop applications, and more. You can design a variety of **applications** using open-source.

**NET Framework** developer platform. It is simple to create **applications **for mobile devices, desktop computers, the web, and the Internet of Things using this free cross-platform framework, which supports a variety of coding languages and has extensive code libraries.

To know more about **NET Framework:**

**brainly.com/question/29750412**

**#SPJ4**

When someone uses experience and/or information from others to determine the project duration and total cost, estimating is being used. A) top-down B) experiential C) bottom-up D) reference class E) professional estimation

### Answers

**Experiential** estimating is being used to determine the project **duration** and total cost.

**What is Experiential?**Experiential learning is an educational

**philosophy**that focuses on learning through experience. It involves actively engaging in a hands-on, sensory-based activity that encourages and facilitates

**learning**. This type of learning is often associated with the physical environment, where the learner

**interacts**directly with the environment and the activity to gain knowledge. Experiential learning can also involve activities such as role-playing, simulations, and problem-solving. This approach to learning is based on the idea that learning is most effective when it is

**meaningful**and relevant to the learner. It promotes active learning,

**reflection**, and the development of

**critical**thinking skills.

To know more about **Experiential**https://brainly.com/question/29851763

#SPJ1

How many types of engineering?

### Answers

ANSWER-

There are many different types of engineering, and the exact number can vary depending on the source. Here are some of the most common types of engineering:

Aerospace Engineering

Agricultural Engineering

Architectural Engineering

Automotive Engineering

Biological Engineering

Chemical Engineering

Civil Engineering

Computer Engineering

Electrical Engineering

Environmental Engineering

Geological Engineering

Geological and Mining Engineering

Geotechnical Engineering

Industrial Engineering

Manufacturing Engineering

Marine Engineering

Materials Engineering

Mechanical Engineering

Mechatronic Engineering

Mining Engineering

Nuclear Engineering

Petroleum Engineering

Software Engineering

Structural Engineering

Systems Engineering

These are just some of the most common types of engineering. There are many other subspecialties and areas of focus within each type of engineering, and new fields of engineering are constantly emerging as technology advances.

If p is true, q is false, and r is true, which of the following logical expressions evaluates as true?

Select one:

a.

p ∧ q ∧ r

b.

(p ν r) → q

c.

(p ∧ q) → q

d.

p ↔ q

### Answers

The right response is C. (p q) q.** Statements** that use logical operators like "and," "or," and "not" to determine if they are true or false are known as **logical expressions**.

Statements that use logical operators to determine whether they are true or false are referred to as **logical expressions**. The "and," "or," and "not" logical operators can be used to compare values or phrases to construct complex conditions. To make** judgements** based on certain conditions, logical expressions are frequently used in programming in control structures like if-else statements and loops. The links between various claims can be deduced using logical expressions in both mathematical proofs and philosophical **arguments**. Many disciplines, including computer technology, mathematics, and philosophy, place a high value on the ability to formulate and analyse** logical formulations**.

Learn more about **logical expressions** here:

https://brainly.com/question/13972816

#SPJ4

When evaluating channel performance, all of the following may serve as performance indicators, except:a. resellers loyaltyb. customer satisfaction with resellerc. exclusive dealing arrangementsd. reseller's contribution to growthe. quantitative indicators

### Answers

All of the following, with the exception of reseller loyalty, may be used as performance indicators when assessing **channel **performance.

What criteria are used to evaluate channel members?

The sales, inventory level, service support, delivery time, complaint resolution, **implementation **of promotional programs, and training performance of channel members are all taken into consideration in the **evaluation **process.

When informal criteria are combined to evaluate the performance of channel members?

Manufacturers are more likely to examine the performance of channel members if their products: require **extensive **post-sale support. When evaluating the performance of channel members informally, multiple criteria are combined: Cross comparisons between members of the channel are not valid.

To know more about **channel **visit :-

https://brainly.com/question/28940346

#SPJ4

list the maximum number of 12 awg conductors permitted in the following metal box: 4 11/16 in x 1 1/2 in square box.

### Answers

The maximum number of 12 AWG **conductors permitted** in a 4 11/16 in x 1 1/2 in square box is two.

What is **conductors permitted?**

Conductors are permitted to use their knowledge, expertise, and experience to **safely and efficiently** transport passengers and goods. Conductors are responsible for ensuring the safety of passengers and goods, ensuring the smooth operation of the train and its associated systems, and providing customer service. Conductors must ensure that the train is **running on time** and conduct ticket checks, checking tickets, IDs and any other documents.

This is because the box size is limited and the** National Electrical Code **(NEC) requires a minimum of 1 cubic inch of space for each conductor. The total volume of the box is 7.5 cubic inches, so dividing that by the minimum of 1 cubic inch per conductor, this box can only accommodate a maximum of two 12 AWG conductors.

To learn more about **conductors permitted**

https://brainly.com/question/28546980

#SPJ4

we need to make scanner functionality available before we can use it. complete java syntax to make this happen

### Answers

Create a Java **Scanner **Object. Scanner sc2 = new Scanner(File file); / read input from a string Scanner sc1 = new Scanner(InputStream input); / read input from files new Scanner(String str); Scanner sc3;

How do I initialise a Java scanner?

How to Set Up and Use a Scanner Using the proper function Object() { [native code] } for the input type, such as **InputStream**, File, or String, the scanner class must first be initialised. Set the delimiter and character set to be used, if necessary.

How can I read a file in Java using Scanner?

The path to the necessary file should be provided as a parameter to the function Object() { [native code] } of the FileInputStream object to be created. The nextLine() **method **reads and returns the next line, while hasNext() checks to see if the file has another line.

To know more about **Scanner **visit:-

https://brainly.com/question/30023269

#SPJ4

how to draw the direction of the net electric force exerted on an object with charge q by thee other object

### Answers

Follow these procedures to determine the **direction** of the net **electric** **force** exerted on an item with charge q by another object with charge Q: Determine the charges' signs.

If both charges have the same sign (both positive or both negative), the net **electric force i**s repulsive, forcing the objects apart. If the charges have **opposite** signs (one positive and one negative), the net electric force is **attracting**, drawing the items together. Make an arrow to illustrate the **vector** of electric force. The arrow should point in the direction of the electric force and begin at the location of the object with charge q. The arrow's length can be adjusted to show the strength.

learn more about **electric force** here:

https://brainly.com/question/2526815

#SPJ4

Derive planar density expressions for FCC(100) and (111) in terms of the atomic radius R.

### Answers

The **planar density** of a crystal structure refers to the concentration of atoms per unit area in a specific plane of the** crystal.** This property is significant in material science.

As it can reveal information about the material's mechanical strength, electrical **conductivity**, and thermal **conductivity**. The atomic radius, or the distance between the atoms in a **crystal**, plays a crucial role in determining the** planar density** of the **crystal.**

In face-centered cubic (FCC) structures, two common **crystal **planes exist: (100) and (111). The (100) plane is a flat plane with a uniform arrangement of atoms and is perpendicular to one of the** crystal'**s axes. The (111) plane, on the other hand, is made up of tightly packed atoms in a triangular pattern.

To calculate the **planar density** of an FCC (100) plane, the number of atoms is divided by the area of the plane. Using the atomic radius, R, the **planar density** can be expressed as: 4/(√2 * R^2).

The **planar density** of an FCC (111) plane can be expressed as: 2 * √3 / (R^2). This expression takes into account the triangular pattern of atoms in the (111) plane and the fact that each atom has three neighbors in this plane.

To learn more about **planar density, **click here:

https://brainly.com/question/14987782

**#SPJ4**

Product Management works with which other role to define and maintain non-functional requirements?

A) Enterprise Architects

B) System and Solution Architect/Engineering

C) System Team

D) Lean UX

### Answers

Product management works with** system and solution architects** to define and maintain **nonfunctional **requirements.

Designing, describing, and controlling solution** engineering **to align it with particular business **challenges** is the profession of solution architecture. For instance, a business-level issue is how to protect **consumer** data under the GDPR and other privacy requirements. Solution architecture outlines how those** requirements **would be **implemented** in a specific piece of software. The practice is led by a solution architect, who also** introduces** the solution's broad technical perspective. Although the business can be run internally, there are organizations that offer solution architecture** consulting** as a particular set of services. These phrases each have various components, which we'll go over in this post. See our video about the role of a solution architect if you want to** rapidly** learn all the specifics.

Know more about **Product Management** here:

https://brainly.com/question/1379995

#SPJ4

what is the advantages of gourmia digital french door air fryer toaster oven

### Answers

The oven produces** **800 J of **thermal **energy, which is valuable energy that may be used for cooking.

One of the most transportable large-capacity air fryers we recommend, the Gourmia GAF686 Digital, excelled in CR's** air fryer** tests. Despite having a 4.3-quart measured capacity, its overall dimensions are comparable to those of variations with smaller capacities. For instance, depending on what your air frying is, a 2-4.5l capacity air fryer is appropriate for 1-2 people and a 4.5-10l capacity is ideal for 2-4 people. To determine how much space you'll need, consider the number of people you'll be feeding. A larger **capacity **allows you to prepare several meals at once. A proportion that equals one-tenth of a quantity. One tenth of something is equivalent to one percent, represented by the symbol 1%; hence, 100 percent signifies the complete thing, and 200 percent designates twice the amount given.

Learn more about **Air fryer** here:

https://brainly.com/question/30040891

#SPJ4

the following pie chart summarizes the results of a survey given to airlines about the primary reason for flight delays.

### Answers

The weather contributed to more delays than all other factors combined. Only flights that travel to, from, or within the United States are subject to the Department's regulations on flight delays and **cancellations. **

However, the laws of another country may provide protection against aircraft **delays** and** cancellations **for passengers traveling between or within foreign countries.

**Passengers** should be aware that airlines do not guarantee their timetables when making travel arrangements. Although airlines strive to deliver **passengers** to their destinations on time, a number of factors can and occasionally do delay flights. Some challenges, such as inclement weather, air traffic **delays,** and technical problems, are difficult to anticipate and frequently out of the airlines' control.

In order to give the general public quick access to information regarding the services U.S. airlines offer to lessen passenger inconveniences when the reason for a **cancellation** or delay was due to events without the airline's control, the U.S. Department of Transportation has built a dashboard.

To know more about **cancellation** :

brainly.com/question/21506116

#SPJ4

The following pie chart summarizes the results of a survey given to airlines about the primary reason for flight delays. Which of the following statements is supported by the pie chart?

Suppose the voltage across the white LEDS is 4V and the current is 0.2 A. What is the power dissipated by the LEDS? O 8 Watts O 0.8 Watts O 20 Watts O 8 Watts O 0.8 Watts

O 0 Watts O 2 Watts

### Answers

The **power **dissipated by the LEDS is **0.8 Watts.****What is voltage**

**Voltage **is an electrical **potential **difference between two points. It is a measure of the energy available to do work and is typically expressed in **volts**. Voltage is the energy per unit charge, or the driving force that allows electrons to move through a circuit or system. It is the difference in electrical potential between two points, measured in volts. Voltage is generally created by a **power** source such as a **battery **or **generator **and is used to power motors, lights, and other electrical components. Voltage is also referred to as electromotive force or EMF. Voltage is essential in the process of converting **electrical **energy into useful work. It is responsible for the flow of electrons through a **circuit**, and can be used to control the amount of power delivered to a load or a device.

To know more about **voltage **

https://brainly.com/question/29445057

#SPJ1

What did IDEO discover when tasked with developing a medical device for nurses?Nurses had no idea what they needed.Nurses could describe what they needed.Nurses needed to be observed working.Nurses' feedback was not necessary.

### Answers

IDEO discovers when tasked with developing a **medical device **for nurses that they are needed to be **observed** working. Thus, the correct option for this question is **C**.

What are some medical devices for nurses?

Some **medical devices** for nurses may significantly include stethoscopes, blood pressure cuffs, and a variety of **thermometers**. Apart from this, Hematology Analyzers, ECG machines, X-ray machines, etc. are also required by nurses in order to analyze the **functioning **of patients.

According to the context of this question, the **observation **of nurses during their working is definitely required in order to check their efficiency and **accuracy **in their working hours. So, some medical devices are developed for nurses for such **procedures**.

Therefore, IDEO discovers when tasked with developing a **medical device **for nurses that they are needed to be **observed** working. Thus, the correct option for this question is **C**.

To learn more about **Medical devices**, refer to the link:

https://brainly.com/question/28964533

#SPJ1

TRUE OR FALSE data design is how you organize information; data strategy is the management of the people, processes, and tools used in data analysis

### Answers

It is true that **data design** is how you organize information. The **data strategy** is the management of the people, processes, tools, and many more things used in data analysis. (Option - True)

Data design defines the types of data that are stored in the system. It also defines the relationships between the data and the ways that data can be grouped or organized. A data model is a blueprint that facilitates an understanding of the data** **that is stored.

A **data strategy** helps identify the well-defined tools that meet business needs and support. This support is for both IT teams and business users. One can even verify that the tools meet all** data** policies, ensuring compliance with all rules and regulations.

Learn more about **data strategy** at:

brainly.com/question/21567536

**#SPJ4**

Part 3: Feedwater Probability (20 points / 16 points) Feedwater is needed to provide steam generator cooling. The Main Feedwater system (MFW) is relied on first. If MFW fails, the Auxiliary Feedwater (AFW) system is used. The probability that the MFW system fails for any reason during an accident is 0.01. The MFW system consists of two MFW pumps. The probability of a MFW pump failing due to mechanical failure is 0.002, but if one pump breaks then there is a 50% chance the other pump will also have a mechanical failure.

Even though the two systems are very different, the MFW and AFW systems are not necessarily independent-- there could be an underlying cause that fails both systems such as a seismic event. Given the MFW system fails, AFW system failure = 0.03. 3a. Calculate the probability that at least one MFW pump experiences mechanical failure. Do not use the rare event approximation. 3b. Calculate the probability that MFW fails and then AFW fails. Do not use the rare event approximation.

### Answers

The **probability** that at least one pump fails is 0.002.

The **probability** that MFW fails and then AFW fails is 0.0003.

How to calculate the probability

**Probability** simply means the chance that a particular thing or event will happen. It is the occurence of likely events. It is simply the area of **mathematics** that deals with the numerical estimates of the chance that an event will occur or that a particular statement is true.

The probability that at least one **pump** fails is:

= 0.002 × 50/100 + 0.002 × 50/100

= 0.002.

The **probability** that MFW fails and then AFW fails is:

= 0.03 × 0.01

= 0.0003.

Learn more about **probability** on:

https://brainly.com/question/24756209

#SPJ1

the temperature at which the following process reaches equilibrium at 1.0 atm is the normal boiling point of hydrogen peroxide. (r

### Answers

The normal boiling point of **hydrogen** peroxide is the temperature at which the following process reaches **equilibrium**, at 1.0 atm:

**H2O2(l) --> H2O2(g)**

At this **temperature**, the vapor pressure of liquid hydrogen peroxide is equal to the **atmospheric **pressure of 1.0 atm. The normal boiling point of hydrogen peroxide is approximately** 150°C** (302°F).

The transition of liquid hydrogen peroxide to a **gaseous **state is an **endothermic **process , meaning that the process requires energy to occur. This energy is supplied by the heat of **vaporization**, which is the amount of energy needed to convert one mole of liquid hydrogen peroxide to a gaseous state.

The heat of vaporization of **hydrogen **peroxide is approximately 38.6 kJ/mol.

Learn more about **boiling point of hydrogen peroxide:**

https://brainly.com/question/491734

#SPJ4

The transistor made radio receivers ______. A) portable. B) expensive. C) larger. D) stereophonic. E) disposable. A) portable.

### Answers

**Answer:**

A. portable

**Explanation:**

A transistor radio is a small **portable** radio receiver that uses transistor-based circuitry. Following the invention of the transistor in 1947—which revolutionized the field of consumer electronics by introducing small but powerful, convenient hand-held devices—the Regency TR-1 was released in 1954 becoming the first commercial transistor radio.

determine the minimum initial velocity v0 at which the ball must be kicked in order for it to just cross over the 3- m high fence.

### Answers

The initial velocity v0 required for the ball to just cross over the 3-m high fence can be determined using conservation of energy. The initial **kinetic energy** of the ball must be equal to the potential energy it has when it reaches the top of the fence.

What is **kinetic energy?**

Kinetic energy is the energy of motion. It is the** energy associated** with an object's motion or the motion of a particle. It is the energy associated with the movement of an object or particle, and can be transferred between objects or particles.

The initial kinetic energy of the ball is ½mv0², where m is its mass and v0 is its initial velocity. The potential energy of the ball at the top of the fence is mgh, where m is its mass, g is **gravitational acceleration**, and h is the height of the fence (3 m).

Therefore, the initial velocity v0 can be determined by equating the two equations:

½mv0² = mgh

v0² = 2gh

v0 = √(2gh)

Therefore, the minimum** initial velocity** v0 at which the ball must be kicked in order for it to just cross over the 3-m high fence is v0 = √(2gh), where g is the gravitational acceleration and h is the height of the fence.

To learn more about **kinetic energy**

https://brainly.com/question/27209395

#SPJ1

Consider a double-pane window of area A consisting of two layers of glass (kz) separated by stagnant air (kz). The inside temperature is 20° C, and the outside temperature is -10° C. The inner convective heat transfer coefficient is h, and the outer convective heat transfer coefficient is hz. Assuming the total resistance is 0.4332°C/W, what is the steady rate of heat transfer through the window? a) 52.5 W b) 63.1 W c) 69.2 W d) 74.6 W e)

### Answers

**52.5 W** is the steady rate of **heat **transfer through the window .**What is heat transfer ?**

Heat transfer is the process of **energy **exchange between two objects with different **temperatures**. Heat transfer occurs due to conduction, **convection**, or **radiation**. Conduction occurs when two objects with different temperatures touch each other, causing the energy from the hotter object to travel to the colder object. Convection occurs when a fluid, such as air or water, carries the energy from one object to another. Radiation occurs when energy is **transferred **in the form of **electromagnetic **waves, such as light or infrared radiation. Heat transfer is an important natural phenomenon that is used to heat and cool homes, **power **machines, and even cook food.

To know more about **heat transfer **

https://brainly.com/question/13433948

#SPJ1

How to Fix This Warning in Pandas?

### Answers

Bring the Pandas module in. Establish a **DataFrame**. Using the drop() method, remove some rows from the DataFrame. Make use of the reset_index() method to reset the DataFrame's index.

In Python, why do we disregard warnings?

The purpose of the warnings is to alert the developer of circ*mstances that are not necessarily **exceptions**. A warning typically appears when certain programming elements, such as a keyword, function, or class, have become **obsolete**. A program warning is different from an error.

How can the message that a value is attempting to be set on a slice copy from a DataFrame be avoided?

If a DataFrame is a copy, its is_copy property, which is set to None by default, uses a **weakref** to point to the original DataFrame. You can avoid generating a warning by setting is_copy to None.

To know more about **DataFrame **visit :-

https://brainly.com/question/28190273

#SPJ4

Suppose two hosts, A and B, are separated by 20,000 kilometers and are connected by a direct link of R=2 Mbps. Suppose the propagation speed over the link is 2.5-108 meters/sec. a. Calculate the bandwidth-delay product, R.dprop.

### Answers

The **bandwidth**-delay product represents the amount of data that can be transmitted over a network connection given the available bandwidth and the amount of delay experienced by packets traveling over the connection.

It is calculated by multiplying the **bandwidth** (R) by the round-trip **propagation delay** (dprop). The **propagation delay** is the time it takes for a packet to travel from one host to another and back and is influenced by the distance between the hosts and the speed at which signals travel over the network connection.

In the scenario described, with hosts A and B separated by 20,000 kilometers and connected by a direct link with a **bandwidth** of 2 Mbps and a propagation speed of 2.5 x 10^8 m/s, the **propagation delay **can be determined to be 8000 x 10^-5 seconds.

The resulting** bandwidth-delay **product can be obtained by multiplying R and drop, resulting in a value of 16000 bits. the most data that can be sent through an internet connection in a specific amount of time is called **bandwidth.**

To learn more about **bandwidth, **click here:

https://brainly.com/question/28436786

**#SPJ4**

A gas station operator is interested in determining which gas pump is used most frequently by customers. The best tool for collecting this data would be a______________.

### Answers

**CHECK SHEET**. A systematic, prepared form for gathering and assessing data is a check sheet. One of the seven fundamental quality tools, this is a general data-collecting and analysis tool that may be customized for a wide range of uses.

A **check sheet** is used when information may be repeatedly observed and gathered by the same person or at the same place. When gathering information on the frequency or patterns of incidents, faults, or flaws, as well as their causes or locations, When gathering **information** about a production **process**.

A **check sheet** **process** - Choose the issue or occurrence that will be observed. Create definitions that are operational. Determine when and how long data will be gathered. Create the form **check sheet**. Create the system so that data may be entered by simply marking boxes with checkmarks, Xs, or other symbols and that no additional copies of the data are required for analysis. Label each field on the form.

For a brief test time, see if the check sheet gathers the right** information **and is simple to use. Record information on the check sheet each time the intended issue or event happens.

To know more about **check sheet:**

**brainly.com/question/29741406**

**#SPJ4**

A big upfront requirements document makes it easy for the developers to prioritize individual requirements.TrueFalse

### Answers

It's true that **developers** can easily assign priority to individual requirements with a comprehensive upfront requirements document.

What is sufficient upfront design in Agile?

The key to running an **Agile process** that works well is to do just the right amount of design and leave room for future changes. A philosophy known as "Enough Design Up Front" (EDUF) holds that the appropriate amount of design is sufficient to establish solid foundations for a **software** product and its delivery.

What are Agile's high-level requirements?

Instead, a product **backlog** with high-level requirements, typically in the form of user stories, is used for planning and prioritizing.

To know more about **developers **visit :-

https://brainly.com/question/17173845

#SPJ1

which of the following works with ids software to detour suspected malicious traffic to a honeypot that mirrors the real network without alerting the

### Answers

The **honeypot **trap is a technique used with IDS software to detect and divert suspicious traffic to a honeypot without alerting the attacker. A honeypot is a networked resource or server whose purpose is to mimic legitimate services, luring attackers away from the real network while they are being monitored.

What is **honeypot?**

A honeypot trap is a technique used in computer security to protect networks from **malicious activities**. It is a computer system or network that is set up to appear as an attractive target for attackers. This allows security personnel to observe, track and potentially prevent malicious activities. The honeypot is designed to look like a legitimate target, but when an **attacker** tries to access it, they are instead diverted to the honeypot. The honeypot then logs the attacker's activities, allowing security personnel to analyze the attack and take appropriate countermeasures.

By sending the **malicious traffic** to the honeypot, the IDS can provide a detailed analysis of the attacker's activity and intentions, giving the security team more information to identify and protect against future threats.

To learn more about **honeypot**

https://brainly.com/question/29663609

#SPJ4

Which scale is based on tenths and hundredths of an inch?

Select one:

a. Architect's

b. Civil engineer's

c. Decimal

d. Mechanical engineer's

### Answers

The scale that is based on the tenths and hundredths of an inch is c. **Decimal.**

The **decimal scale** is a measurement system that is based on **tenths **and **hundredths **of an inch. It is a precise measurement system commonly used in various fields such as engineering, manufacturing, and construction.

In the decimal scale, one inch is divided into 10 equal parts, with each part being referred to as a "tenth". Each tenth is further divided into 10 equal parts, resulting in 100 equal parts, with each part being referred to as a "hundredth". Therefore, one inch is equal to 10 tenths or 100 hundredths.

For example, a measurement of 2.45 inches would mean 2 whole inches and 45 hundredths of an inch. This can be represented as 2.45 on the decimal scale. The decimal scale is used for precision measurements where accuracy is important, and it is commonly used in applications such as machining, metrology, and inspection.

Learn more about** the Decimal** **scale: **https://brainly.com/question/29081533

#SPJ11

what is the difference between the count aggregate function and the sum aggregate function?

### Answers

**Answer:**

The count and sum aggregate functions are both used to perform mathematical calculations on data in a database or table. However, they perform different calculations and are used for different purposes.

The count function returns the number of rows in a table that match a specific condition. It can be used to count the number of records, the number of non-null values, or the number of unique values in a specific column. For example, you can use the count function to find the number of employees in a department or the number of customers who made a purchase in a specific month.

On the other hand, the sum function returns the sum of the values in a specific column. It is used to add up the values in a column, such as the total sales, the total salary of employees, or the total quantity of products sold.

In summary, the count function is used to count the number of records in a table, while the sum function is used to add up the values in a specific column.

What is the force that counteracts the lift force for flight?

### Answers

**Answer:**

Thrust works opposite of drag. When the forces are balanced, a plane flies in a level direction. The plane goes up if the forces of lift and thrust are more than gravity and drag. is the gravity force.